Police Option Diagrams

POLICE OPTION DIAGRAMS

CAUTION
- Any Auxiliary Warning Lights, controlled by the Lighting Control Module (LCM), need diode protection to prevent current spike damage to the LCM.
- When installing aftermarket equipment, avoid using fasteners that are too long for the application or in an area which might damage vehicle components, i.e. wiring, brake lines, fuel tank and lines, powertrain components, exhaust system, suspension, etc.
- Also, DO NOT make electrical connections into the Powertrain Control Module or PCM harness. Connecting into this system may affect engine and transmission operation.
- As an example: Connection of aftermath electrical equipment into the brake light circuit or any other circuit which is connected to the PCM, anti-lock brake computer, air bag system or any other vehicle system will cause malfunction.

Diagram 96-1:

Battery Junction Box
Central Junction Box
Fuse 4
Fuse 6
Fuse 8
Fuse 16
Lighting Control Module
Police Map Lamp Assembly
Police Option Fuse Holder
Police Power Relay

Diagram 96-2:

Central Junction Box
Fuse 8
Left Spotlamp
Lighting Control Module
Luggage Compartment Lid Lamp
Luggage Compartment Lid Switch
Rear Flasher
Right Spotlamp

Diagram 96-3:

Central Junction Box
Fuse 1
Fuse 5
Lighting Control Module
Multifunction Switch

Diagram 96-4:

Central Junction Box
Emergency Flasher Relay #1
Emergency Flasher Relay #2
Emergency Flasher Relay Block
Fuse 16
LR Park/Stop/Turn Lamp #1
LR Park/Stop/Turn Lamp #2
RR Park/Stop/Turn Lamp #1
RR Park/Stop/Turn Lamp #2

Diagram 96-5:

Front Flasher







Electrical Police Aftermarket Equipment