Brake Pedal Position (BPP) Switch

REMOVAL







1. Disconnect the battery ground cable.







2. Remove the lower insulator.
1 Remove the push pins.
2 Disconnect the interior lamp.
3 Remove the lower insulator.







3. Disconnect the Brake Pedal Position (BPP) switch.







4. Remove the BPP switch.
1 Remove the cotter pin.
2 Remove the sleeve.
3 Remove the BPP switch.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.