Initial Inspection

1. Verify the customer concern by checking the air bag indicator in the instrument cluster. Refer to Prove Out the System.
2. Visually inspect for obvious signs of mechanical and electrical damage using the following chart.

Visual Inspection Chart

Mechanical
- Damaged air bag Electronic Crash Sensor (ECS) module bracket

Electrical
- Blown fuse(s)
- Damaged wiring harness
- Loose or corroded connectors
- Circuitry open/shorted
- Damaged shorting bars

3. If the concern is not visually evident, use the New Generation Star (NGS) Tester to retrieve Diagnostic Trouble Codes (DTCs) and perform the on-demand self test.
4. If the on-demand self test is passed and no DTCs are retrieved, proceed to the symptom chart.
5. If DTCs are retrieved, proceed to the Air Bag Electronic Crash Sensor (ECS) Module Diagnostic Trouble Code (DTC) Priority Table.