Camshaft: Specifications
| Lobe Lift-Exhaust | LH | 6.59579 Millimeter (mm) |
| RH | 6.58551 Millimeter (mm) | |
| Lobe Lift-Intake | 6.58077 Millimeter (mm) | |
| Lobe Lift-Allowable Lobe Lift Loss | 0 Millimeter (mm) | |
| Theoretical Valve Lift @ Zero Lash-Intake | 0.472 Inch (in) | |
| Theoretical Valve Lift @ Zero Lash-Exhaust | 0.472 Inch (in) | |
| End Play | .027-.190 Millimeter (mm) | |
| End Play-Service Limit | .0075 Inch (in) | |
| Journal To Bearing Clearance | .00098-.003 Inch (in) Tighten Camshaft Bearing Caps Bolts To 8-12Nm (72-107lb/in) When Measuring Journal Clearance. | |
| Journal To Bearing Clearance(Service Limit) | .076 Millimeter (mm) Tighten Camshaft Bearing Caps Bolts To 8-12Nm (72-107lb/in) When Measuring Journal Clearance. | |
| Journal Diameter(ALL) | (1.060-1.061) Inch (in) | |
| Journal Diameter-Bearing Inside Diameter | (1.0625-1.063) Inch (in) | |
| Camshaft Journal Runout | 0.09 Millimeter (mm) |