Fuel Level Sensor: Service and Repair

SPECIAL TOOLS

Wrench, Sender Unit, Fuel Tank:

REMOVAL

WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE VAPORS ARE ALWAYS PRESENT AND MAY IGNITE. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

1. Remove the fuel tank.







2. Disconnect the fuel feed pipe.


NOTE: Fuel supply line connectors are white or are identified by a white band. Fuel return line connectors are red or are identified by a red band.







3. Remove the fuel pump locking ring.







4. Remove the fuel pump.


INSTALLATION






1. Install a new 0-ring seal.

2. To install, reverse the removal procedure.