Inspection and Verification (Start Testing Here)

1. Verify the customer concern by operating the system.
2. Visually inspect for obvious signs of mechanical or electrical damage.

VISUAL INSPECTION CHART

Electrical
^ Lamp switch
^ Fuse(s)
^ Wiring harness
^ Loose or corroded connectors
^ Headlamp bulb
^ Multifunction switch

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
4. If the concern is not visually evident, determine the symptom and refer to the Symptom Chart. Symptom Chart(s)