System Arming

The system will be armed by the keyless entry remote transmitter when the following input sequence is followed:
1. Turn the ignition switch off and remove the key.
2. Close all the doors (unlocked).
3. Press the LOCK button on the transmitter to lock the doors. The turn signal lamps will flash once.
4. If the turn signal lamps do not flash, the system is not armed.

The system will also be armed when the following input sequence is followed:
5. Turn the ignition switch off and remove the key.
6. Close all the doors (unlocked).
7. Lock the doors, with the mechanical key. The turn signal lamps will flash once.
8. If the turn signal lamps do not flash, the system is not armed.

Opening my door will activate the alarm after the alarm is armed.