Resistance/Continuity Tests- TFT Sensor

1. Set 88 Digital Multimeter on Ohms range.
2. Connect the positive (red) lead of 88 Digital Multimeter to EEC-V 104-Pin Breakout Box pin 37.
3. Connect the negative (black) lead of 88 Digital Multimeter to EEC-V 104-Pin Breakout Box pin 91 for ground.
4. Resistance measurements will vary with Automatic Transmission Fluid (ATF) temperature.

TFT Resistance:

5. If the resistance is not within specification, go to Pinpoint Test B.