Front

CAUTION: Do not attempt to adjust the wheel alignment without first making a preliminary inspection of the front end parts and correcting where necessary.

PRIOR TO INSPECTION:
^ Fill all fluids to specification.
^ Make sure spare tire or wheel and related equipment are properly stored.
^ Remove any excessive accumulation of mud, dirt or road deposits from the chassis, wheels and underbody.
^ Retain all normal loads in the vehicle. Inflate all tires to the recommended pressure.
^ Check both front tires and make sure they are the correct size.

INSPECTION
1. Check all tires for proper inflation pressure.
2. Check tire condition to confirm proper front end alignment, tire balance and overall tire condition such as separation or bulges.
3. Check the vehicle attitude for evidence of possible overload or sagging.
4. Road test the vehicle to confirm the customer concern.
5. Replace any worn or damaged insulators and bushings. Tighten all attachments to the specified torque.