With Automatic Transaxle

REMOVAL

CAUTION: Electronic modules are sensitive to static electrical charges. If the modules are exposed to these charges, damage may result.

1. Disconnect the battery ground cable.
2. Remove the parking brake and shift consoles.







3. Place the gearshift lever in LOW and remove the four transmission control selector dial bezel screws.







4. Turn the transmission control selector dial bezel one-quarter turn counterclockwise.







5. Loosen the bolt and disconnect the PCM electrical connector.







6. Slide the Powertrain Control Module (PCM) straight out.







INSTALLATION
1. Follow the removal procedure in reverse order.