Cable Bracket

REMOVAL







1. Disconnect the accelerator cable from the throttle control lever and the accelerator cable bracket.
1. Disconnect the cable housing from the accelerator cable bracket.
2. Disconnect the accelerator cable end from the throttle control lever.
3. Position the accelerator cable aside.







2. Disconnect the speed control actuator cable from the throttle control lever.
1. Disconnect the speed control actuator cable from the throttle control lever.
2. Remove the bolt.







3. Remove the accelerator cable bracket.
1. Remove the bolts.
2. Remove the accelerator cable bracket.












INSTALLATION
1. To install, reverse the removal procedure.
- Adjust the accelerator cable.
- Adjust the speed control actuator cable.