Runout

Excessive radial and lateral runout of a wheel and tire assembly can cause roughness, vibration, wheel tramp, tire wear, and steering wheel tremor.

NOTE: Perform runout checks only after the vehicle has been driven far enough to warm the tires and to avoid false readings caused be temporary flat spots on the tires.

The extent of the runout is measured with Radial Runout Gauge. All measurements are made on the vehicle with the tires inflated to recommended inflation pressures.






Measure the (1) radial and the (2) lateral wheel runout.

Use Radial Runout Gauge to measure the (4) radial runout of the tire at the center and outside ribs of the tread face and the (3) lateral runout on the tire sidewall. Mark the high points of radial runout for future reference.