Initial Inspection and Diagnostic Overview

1. Verify the customer concern by operating the daytime running lamps.
2. Visually inspect for obvious signs of mechanical and electrical damage using the following chart:

VISUAL INSPECTION CHART

Mechanical
^ Damaged headlamp switch

Electrical
^ Blown fuse(s):
- Fuse junction panel fuse FOG (10A)
- Fuse junction panel fuse R. WIPER (10A)
^ Damaged wiring harness
^ Loose, damaged, or corroded connectors
^ Blown headlamp bulb

3. If the fault is not visually evident, verify the symptom and Symptom Related Diagnostic Procedures