Rear

REMOVAL





1. Disconnect the battery ground cable.





2. Disconnect the electrical connector.





3. Remove the rear anti-lock brake sensor grommet.





4. Disconnect the rear anti-lock brake sensor wire from the upper harness clip.





5. Disconnect the rear anti-lock brake sensor wire from the lower harness clip.





6. Remove the rear anti-lock brake sensor.
1 Remove the bolt.
2 Remove the rear anti-lock brake sensor.

INSTALLATION





1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn its strategy.