AX4N

NOTE: Mineral spirits used to clean the torque converter must be fresh, non-chlorinated and non-halogenated.

Following the instructions included with the Rotunda Torque Converter/Oil Cooler Cleaner 014-00028 or equivalent, flush out the torque converter.

After flushing the torque converter, follow these steps:
- Thoroughly drain the remaining solvent through the impeller hub.
- Add 1.9L (2.0 quarts) of Motorcraft MERCON V Automatic Transmission Fluid or equivalent meeting MERCON V specification to the torque converter.
- Agitate the solution inside the torque converter by hand.
- Thoroughly drain the torque converter through the impeller hub.