Evaporative Check Valve: Service and Repair

REMOVAL
1. Raise and support the vehicle.
2. Drain and lower the fuel tank.
3. Remove the evaporative emission hose from the evaporative emission tube shut off valve to the evaporative emission return tube.
4. Remove the evaporative emission return tube.
5. Remove the bracket and the evaporative emission tube shut off valve.

INSTALLATION
1. Follow the removal procedure in reverse order.
2. Perform the Evaporative Emission System leak test procedure. EVAP System Leak Test
3. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle Test. EVAP Running Loss System Repair Verification