Air Cleaner Outlet Tube

REMOVAL
1. Loosen engine air cleaner tube clamps on air cleaner outlet tube.
2. Disconnect crankcase ventilation hoses from air cleaner outlet tube fittings.
3. On vehicles equipped with 3.0L (2V) engines, disconnect the engine control sensor wiring from the Intake Air Temperature Sensor (IAT sensor).
4. Remove air cleaner outlet tube from Mass Air Flow Sensor (MAF sensor) and throttle body.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten engine air cleaner tube clamps to 2 Nm (17 inch. lbs.)