Inspection and Verification (Start Testing Here)

1. Verify the customer's concern by operating the parking lamps to duplicate the condition.

NOTE: For vehicles equipped with lamp-out feature, go to Parking Lamps (With Lamp Out Module).

2. Inspect to determine if one of the following electrical concerns apply:

VISUAL INSPECTION CHART

Electrical
^ Circuitry open/shorted.
^ Power distribution box Fuse 20 (15 A).
^ Fuse junction panel Fuse 2 (5 A).
^ Damaged connector.
^ Miniature miniature bulb burned out.
^ Damaged headlamp switch.

3. If the inspection reveals obvious concern(s) that can be readily identified, service as required.
4. If the concern(s) remains after the inspection, determine the symptom(s) and Symptom Chart(s)