Inspection and Verification (Start Testing Here)

1. Verify the customer's concern by operating the headlamp/autolamp system to duplicate the condition.
2. Inspect to determine if one of the following electrical concerns apply:

VISUAL INSPECTION CHART

Electrical
^ Circuitry open/shorted.
^ Damaged connectors.
^ Damaged light sensor amplifier.
^ Damaged headlamp time delay switch.
^ Damaged relay.
^ Power distribution box Fuse:
^ 20 (15 A).
^ 22 (30 A).
^ Fuse junction panel Fuse:
^ 3 (10 A).
^ 4 (10 A).
^ 30 (15 A).
^ Damaged headlamp switch.

3. If the inspection reveals obvious concern(s) that can be readily identified, service as required.
4. If the concern(s) remains after the inspection, determine the symptom(s) and Symptom Chart(s)