60/40 Rear-Sedan (Outer Frame Cover)

REMOVAL
1. Remove seat back assembly from vehicle and place it on a clean surface.
2. Disengage J-retainer along top of rear seat back cover.
3. Remove hog rings retaining rear seat back cover.
4. Remove rear seat back cover.

INSTALLATION
1. Position rear seat back cover evenly to rear seat back pad and frame assembly.
2. Hog ring rear seat back cover to rear seat back pad and frame.
3. Engage J-retainer along top rear seat back cover.
4. Install seat back assembly.
5. Check the restraint system for proper operation.