Inertia Fuel Shutoff Switch Reset Instructions

WARNING: If you see or smell gasoline at any time other than during fueling, do not reset the Inertia Fuel Shutoff (IFS) switch.

- Turn key OFF.
- Check for fuel leaks in the engine compartment.
- If no leak is apparent, reset the IFS switch by pushing the reset button on the top of the switch.

NOTE: In the closed position, the button can be depressed an additional 1.57 mm (1/16 inch) against a spring.

- Turn key to ON or START position for a few seconds, then OFF again.
- Again, check for leaking fuel.