Removal

1. Remove engine Air Cleaner (ACL).
2. Remove battery.
3. Remove battery tray.
4. Recover A/C system.
5. Raise vehicle on hoist.
6. Drain engine cooling system.
7. Remove four bolts retaining lower radiator hose shield and remove lower radiator hose shield.
8. Disconnect lower radiator hose from radiator.
9. Disconnect A/C evaporator muffler and hoses from A/C condenser core.





10. Disconnect lower transmission oil cooler tube from radiator using 3/8 Inch Fuel Line Disconnect Tool 310-S039 (T9OT-9550-S) (blue).
11. Remove two screws from the lower transmission oil cooler tube and allow transmission oil cooler tube to hang.
12. Remove both transmission oil cooler tubes from left end of power steering/transmission oil cooler.
13. Remove lower radiator mounts.
14. Lower vehicle.
15. Remove four bolts retaining hood latch support and position hood latch support aside.
16. Remove front bumper cover.
17. Remove upper radiator support.
18. Disconnect radiator overflow hose from radiator.
19. Remove power distribution box and harness and bracket and position power distribution box and harness aside.
20. Disconnect fan motor from engine control sensor wiring.
21. Remove six screws retaining engine control sensor wiring and position engine control sensor wiring aside.
22. Disconnect power steering fluid cooler from power steering pump.
23. Support fan blade and fan shroud assembly.





24. Remove four bolts from cooling fan motor, fan blade and fan shroud assembly brackets to sub-frame.





25. Lift cooling fan motor, fan blade and fan shroud assembly out of vehicle.