Removing Scratches/Swirl Marks/Restore Dull Finish

The Black and Decker Buffmaster(R) 5950 is the tool of choice. Variable speed buffers are available in a variety of buffing speeds. The recommended speed range is (1200-1750 rpm).

1. Apply a small amount of Ford Light Duty Body Shop Polish to the pad.

^ Always keep the face of the buffing pad completely flat to the surface, reducing the risk of buffer swirl marks. Watch your pad, especially on angled surfaces, to be certain that it stays flat

^ When "buffing out" oxidation or other paint defects with a cleaning material, use a liberal amount of material, slower buffing motion and added downward pressure to increase cutting action

2. When polishing, keep the pad flat against the surface. Do not bear down. The weight of the buffer is suffi6ient.

CAUTION:
DO NOT MIX PRODUCTS. USE A SEPARATE, DEDICATED BUFFING PAD FOR EACH PRODUCT TO ACHIEVE DESIRED RESULTS.