Manual Window Regulator

REMOVAL
1. Disconnect the battery ground cable.
2. Remove the door trim panel.
3. Remove the door speaker.







4. Locally peel back the door watershield.
- Using a plastic knife, cut through the Butyl strip to enable the watershield to be peeled back.

CAUTION: Do not touch the adhesive surface as re-bonding will be impaired. Do not attempt to peel the watershield from the door without cutting the Butyl.







5. Remove the window retaining bolts.
- Align the window retaining bolts with the access holes.







6. Reposition the glass.
- Lift and support the glass in the fully closed position.







7. Remove the regulator assembly.

INSTALLATION












1. To install, reverse the removal procedure.