Piston Pin, Engine

GENERAL SPECIFICATIONS
Piston Pin Bore Diameter 21.071-21.032 mm
Length (Center to Center) 138.06-138.4 mm
Pin to Piston Clearance -0.005 to +0 001 mm
Pin to Rod Clearance
Standard 0.004-0.020 mm
Service Limit 0.035 mm
Alignment (Bore to Bore Max Difference):
Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of the centerline