Sulfur Odor

1. With the engine stabilized and ECT equal or greater than 82°C (180°F), accelerate at full throttle to 40 km/h (25 mph) and hold for 8 to 10 km (5 to 6 miles).

2. Accelerate at wide open throttle (WOT) to 88 km/h (55 mph) and quickly decelerate to an idle.

3. Exit the vehicle and move to within 0.6 meters (2 feet) of the tailpipe.

4. Let the vehicle idle for 2 minutes and check for a sulfur odor.

5. Repeat Steps 1 through 4 twice to check for the sulfur odor.

6. If a sulfur odor is detected, reprogram the PCM using the latest update CD-ROM. Refer to the PCM Cross Reference Chart for correct PCM usage.





Obtain an Authorized Modification Decal (FPS 8262 - obtainable through DOES II, 25/pkg) and list the date, dealer number, and summary of modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.