Quick Test 1.0 - Visual Inspection

NOTE: Perform all necessary repairs before continuing with Quick Tests.

Perform the visual check and vehicle preparation procedures.

Inspect the following:
- Air cleaner and inlet ducting
- All engine vacuum hoses for damage: leaks, cracks, blockage, proper routing, etc.
- EEC system wiring harnesses for proper connections bent or broken pins, corrosion, loose wires, proper routing, etc.
- Powertrain Control Module (PCM), sensors and actuators for physical damage
- Engine coolant for proper level
- Transaxle fluid for proper level and condition
- Any non-factory installed items wired into the transaxle or PCM harnesses