System Arming

The system will be armed by the remote entry transmitter when the following input sequence is followed:
1. Turn the ignition switch off and remove the key.
2. Close all doors (unlocked).
3. Press the LOCK button on a transmitter to lock doors. Alarm warning lamp will turn on.
4. Wait for the anti-theft warning lamp to turn off.

The system will also be armed when the following input sequence is followed:

5. Turn the ignition switch off and remove the key.
6. Open a door. Alarm warning lamp will flash.
7. Lock doors with power door switches. Alarm warning lamp will now glow steadily.
8. Close all doors.
9. Wait for the anti-theft warning lamp to turn off.

Opening any door will activate the alarm after the alarm is armed.