Shift Cable: Service and Repair

REMOVAL
1. Move the selector lever to position "N".
2. Remove the air cleaner.





3. Disconnect the selector cable from the automatic transmission selector lever.
1 Remove the bolts.
2 Disconnect the selector cable.
- Disconnect the selector cable from the bracket.
4. Raise the vehicle.
5. Remove the heat shield.





6. Disconnect the selector cable from the selector lever assembly.
1 Disconnect the selector cable.
2 Unlatch the selector cable adjusting cap and disconnect it from the bracket.

INSTALLATION





1. Attach the selector cable to the selector lever assembly.
1 Insert the selector cable to the bracket.
2 Clip the selector cable in place.

NOTE: Do not lock the selector cable adjusting cap.

2. Reinstall the heat shield.
3. Lower the vehicle.





4. Connect the shifter cable.
1 Position the cable.
2 Install the bolts.
3 Connect the cable.
5. Adjust the selector cable.
6. Install the air cleaner.