Fuel Pump Module-Without Returnless Fuel System

[1][2]Fuel Pump Module-Vehicles without Returnless Fuel System

Special Tool(s)







Removal

Warning: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.

Warning: The fuel system remains pressurized for a long time after the ignition is switched off. The fuel pressure must be relieved before attempting any repairs. Failure to follow these instructions may result in personal injury.


1. Relieve the fuel pressure.

2. Remove the fuel tank.

3. Disconnect the fuel line.
- Depress the clips to release the line.
- Disconnect the fuel line.







4. Remove the fuel tank pressure sensor.
- Depress the sensor to release.
- Rotate the sensor to remove.






5. Using the special tool, remove the fuel pump locking ring.







6. Remove the [1][2]fuel pump module.

7. Remove and discard the [1][2]fuel pump module O-ring seal.






Installation


1. Install a new O-ring seal.

2. To install, reverse the removal procedure.