DTC's and Description

NOTE: This pinpoint test is intended to diagnose the TCC solenoid electrical system only. To prevent replacement of good components, be aware that the following areas may be at fault:
- Engine performance and cooling.
- Electrical (Battery, input sensors, wiring harnesses, BOO switch).
- Internal transaxle components, linkages, cooling.

DESCRIPTION
This pinpoint test is intended to diagnose the following components:
- Transaxle wiring harness, TCC.
- Powertrain control module (PCM).

DTC's
P0741: TCC engagement error detected.
P0743: TCC solenoid circuit failure.
P1741: TCC excessive slip detected.
P1742, P1743: TCC solenoid failure.
P1767: TCC solenoid circuit failure.