DTC's and Description

NOTE: This pinpoint test is intended to diagnose the ANT sensor electrical system only. To prevent Placement of good components, be aware that the following areas may be at fault:
- Engine Cooling.
- Electrical (Battery wiring harnesses).
- Internal transaxle components, cooling, fluid.

DESCRIPTION
This pinpoint test is intended to diagnose the Transaxle wiring harness.

DTC's
P1711: TFT sensor out of no-board diagnostic range
P0713: TFT sensor circuit open.
P0712: TFT sensor circuit shorted.
P1783: transaxle over heating indicated.