Steering Column Cover: Service and Repair

REMOVAL
1. Disconnect the battery ground cable. Wait one minute for the driver side air bag module backup power supply to deplete.

WARNING: THE ELECTRICAL CIRCUIT NECESSARY FOR DRIVER SIDE AIR BAG MODULE DEPLOYMENT IS POWERED DIRECTLY FROM THE BATTERY. TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY, THE BATTERY GROUND CABLE MUST BE DISCONNECTED PRIOR TO SERVICING OR REPLACING ANY DRIVER SIDE AIR BAG MODULES SYSTEM COMPONENTS.

2. Remove the steering wheel.





3. Remove the three screws and remove the upper and lower steering column shrouds.





INSTALLATION
To install, reverse the removal procedure.