General Specifications

GENERAL
Gasket Surface Flatness
Per 25 mm (1 inch): 0.04mm (0.0016 inch)
Per 156 mm (6 inch): 0.08 mm (0.003 inch)
Total: 0.15 mm (0.006 inch)
Gasket Surface Finish: 0.2/2.5 0.8 mm (28/100 0.030 inch)
Tappet Bore: 22.25 ±0.015 mm (0.876 ±0.0006 inch)
Camshaft Bore: 45.796-45.821 mm (1.8030-1.8040 inch)