Description and DTC's

NOTE: This pinpoint test is intended to diagnose the shift solenoids electrical system only. To prevent replacement of good components, be aware that the following areas may be at fault:
- Engine performance and cooling
- brakes
- Electrical (Battery, input sensors, wiring harnesses)
- Internal transaxle components, linkages, cooling

DESCRIPTION
This pinpoint test is intended to diagnose the following components:
- Transaxle wiring harness
- SS1
- SS2
- SS3
- Powertrain control module (PCM)

DTC's
P0781, P0782, P0783, P1731, P1732, P1733- Shift errors.
P0750, P0755- Solenoid circuit failures.
P1714- Shift solenoid No. l mechanical failure.
P1715- Shift solenoid No.2 mechanical failure.
P0751,P1751- Shift solenoid No.1 malfunction.
P0756, P1756- Shift solenoid No.2 malfunction.