Inspection and Verification (Start Testing Here)

1. Verify the customer concern by operating the daytime running lamps.
2. Visually inspect for obvious signs of mechanical and electrical damage.

VISUAL INSPECTION CHART

Mechanical
- Damaged multi-function switch.

Electrical
- Blown fuse(s):
- REAR WIPER.
- Daytime Running Lamps (DRL)
- Damaged wiring harness.
- Loose, damaged, or corroded connectors.
- Blown headlamp bulb.

3. If the fault is not visually evident, verify the symptom and refer to the Symptom Chart. Symptom Related Diagnostic Procedures