Brake Proportioning/Combination Valve: Service and Repair

REMOVAL

WARNING: BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES. WASH HANDS THOROUGHLY AFTER HANDLING. IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING WATER FOR 15 MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. IF TAKEN INTERNALLY, DRINK WATER AND INDUCE VOMITING. GET MEDICAL ATTENTION IMMEDIATELY.

- Disconnect the two brake tube fittings and plug.
- Remove the brake pressure control valves.

INSTALLATION
NOTE: Tighten valves to 44-54 Nm (33-39 ft.lbs.)
NOTE: Tighten brake tube nuts to 13-22 Nm (10-16 ft.lbs)

- To install, reverse the removal procedure.
- Bleed the brake system. Refer To Brakes - Service and Repair.