Push Connect Fittings

Hairpin-clip, push-connect fittings on unleaded fuel vehicles:
- consist of a nylon body, O-rings and a hairpin-type retaining clip
- are used at fuel tank inlet and outlet tubes at the fuel pump module, fuel filter inlet and outlet.
- need no tool for removal.

Fuel vapor tube push-connect fittings:
- are used on all vehicles.
- can be removed by hand by squeezing connector to disconnect. No tool is needed for removal.
- are used on evaporative emission tubes at the evaporative emission tube shut off valve, purge line connection and Evaporative Emissions (EVAP) canister.