Initial Inspection and Diagnostic Overview

INSTRUMENT CLUSTER AND PANEL LIGHTING
1. Verify the customer's concern by operating the headlamp switch in the PARK position. Rotate the panel dimmer switch fully up without turning on dome lamps to duplicate the condition.
2. Inspect to determine if any of the following electrical concerns apply:

VISUAL INSPECTION CHART

Electrical
- Fuses (5A).
- Circuit wiring.
- Headlamp switch.

3. If inspection reveals obvious concern(s) that can be readily identified, service as required.
4. If the concern(s) remain after the inspection, determine the symptoms and go to the Symptom Chart. Symptom Related Diagnostic Procedures