LH Quarter Trim Panel-Wagon

Remove

1. Remove rear seat.

2. Remove spare wheel well panel cover.

3. Remove rear safety belt guide nut.

4. Carefully pull quarter trim panel from body.

5. Remove bolt retaining rear safety belt to body.

6. Remove bolt retaining aft seat and safety belt end to floor pan.

7. Remove quarter trim panel from vehicle, feeding safety belts through quarter trim panel.

Install

1. Follow removal procedure in reverse order.

2. Tighten safety belt nut and bolt to 30-40 N.m (23-29 lb-ft).

3. Tighten aft seat retaining bolt to 17-23 N.m (13-16 lb-ft).