Turn Signal Switch: Description and Operation

DESCRIPTION
The multi-function switch assembly, which is mounted to the steering actuator housing, provides electrical switching for:
^ turn signal.
^ headlamp dimmer.
^ headlamp flash-to-pass.
^ hazard warning.
^ cornering lamps.
^ windshield washer/wiper.

NORMAL OPERATION
The turn signals operate in the following manner:
^ Turn ignition switch to RUN.
^ Move turn signal switch lever to the end-of-travel position to indicate a normal full turn.
^ The lever will remain in position without effort until the turn is completed.
^ The turn indicator cancel cam will automatically cancel the turn signal.

LANE CHANGE FEATURE OPERATION
Operate the lane change system as follows:
^ Move and hold the turn signal lever to the first stop position when changing lanes.
^ Releasing the lever will return it to its normal position when the maneuver is over.