Daytime Running Lamp Control Unit: Service and Repair

REMOVAL

WARNING: DAYTIME RUNNING LAMPS CONTROL GETS VERY HOT DURING OPERATION. BE SURE DAYTIME RUNNING LAMPS CONTROL HAS COOLED BEFORE HANDLING IT OR PERSONAL INJURY MAY OCCUR.

1. Disconnect Daytime Running Lamps (DRL) control electrical connector.
2. Remove screw retaining DRL control to front fender apron and remove DRL control.

INSTALLATION
1. Follow removal procedure in reverse order.







2. Tighten screw to 2-3 Nm (18-26 Lb-In).