Replacement

Fig. 34 Oil pump bolt removal sequence:

REMOVAL
1. Remove oil pan (6675) and oil pump screen cover and tube (6622).
2. Remove engine front cover (6019).
3. Remove timing chains.
4. Remove crankshaft sprockets (6306) from crankshaft (6303).
5. Remove oil pump retaining bolts in sequence shown.
6. Remove oil pump (6600) from cylinder block (6010). Inspect oil pump and replace if necessary.

Fig. 35 Oil pump bolt tightening sequence:

INSTALLATION
1. Rotate inner rotor of oil pump to align with flats on crankshaft. Install oil pump flush to cylinder block.
2. Install oil pump retaining bolts in sequence as Shown.
3. Replace oil bypass filter (6714).
4. Install timing chains.
5. Install oil pump screen cover and tube.
6. Install engine front cover.
7. Fill crankcase to proper level with Super Premium Motor Oil XO-5W30-QSP or equivalent meeting Ford specification ESE-M2C153-E.
8. Run engine and check for leaks.