Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

REPLACEMENT
1. Raise and support vehicle.
2. Remove two nuts retaining radiator lower hose tube to LH cylinder head (6049).
3. Remove radiator lower hose tube from the retaining studs on LH cylinder head.
4. Remove oil level indicator tube retaining stud bolt from LH cylinder head.
5. Using a twisting motion, remove oil level indicator tube (6754) from lower cylinder block (6010).
6. To install, reverse removal procedure. Inspect O-ring prior to installing oil level indicator tube. Tighten oil level indicator stud bolt to 8-12 Nm (71-106 inch lbs.). Tighten lower radiator hose tube retaining nuts to 8-12 Nm (71-106 inch lbs.).