Rear Drum

REMOVAL
1. Fully release parking brake.
2. Raise and support vehicle.
3. Lower exhaust system and remove heat shields. Refer to Exhaust System.





4. Disengage parking brake rear cable and conduits from parking brake cable and equalizer.
5. Remove parking brake rear cable and conduit from routing brackets.
6. Remove parking brake rear cable and conduit from parking brake lever. Refer to Drum Brakes - Brake Shoe. Service and Repair

INSTALLATION
1. Reconnect parking brake rear cable and conduit to parking brake lever. Reinstall shoes and drum.
2. Position parking brake rear cable and conduit in routing clips.
3. Attach parking brake rear cable and conduits to parking brake cable and equalizer.
4. Install heat shields and raise exhaust system.
5. Lower vehicle.
6. Adjust cable tension by operating parking brake control several times.