Front Washer Pump and Reservoir

REMOVAL
1. Disconnect battery ground cable.
2. Remove RH front fender splash shield.
3. Remove three bolts retaining windshield washer reservoir to apron.
4. Slide windshield washer reservoir forward.
5. Disconnect wiring harness to windshield washer pump.
6. Disconnect windshield washer hose from windshield washer pump. Remove windshield washer reservoir.

INSTALLATION






1. To install, reverse Removal procedure.
2. Tighten windshield washer reservoir retaining bolts to 3-5 Nm (27-44 in lb).