Knob

REMOVAL
1. Remove gearshift lever.
2. Remove transmission control switch.
3. Remove Allen-head screw retaining gearshift lever knob to transmission control selector rod.
4. Hold gearshift lever knob securely and press release button. Pull up on gearshift lever knob to remove.

INSTALLATION
1. Install gearshift lever knob over transmission control selector rod and transmission control switch wiring.
2. Install Allen-head screw retaining gearshift lever knob to shift lever. Tighten to 2-3 Nm (17-26 inch lbs.).
3. Install transmission control switch.
4. Install gearshift lever.