Initial Inspection and Diagnostic Overview

1. Inspect starter system for loose connections.

WARNING: WHEN SERVICING STARTER OR PERFORMING OTHER ENGINE COMPARTMENT WORK NEAR THE STARTER, BE AWARE THAT THE HEAVY GAUGE BATTERY INPUT LEAD AT THE STARTER SOLENOID IS "ELECTRICALLY HOT" AT ALL TIMES. WHEN WORKING NEAR THE STARTER, BE CAREFUL TO AVOID TOUCHING HOT EXHAUST COMPONENTS.

2. If inspection reveals obvious concern(s) that can be readily identified, service as required.
3. If system does not operate properly, note condition and continue diagnosis using the Symptom Chart. Symptom Related Diagnostic Procedures