Front Wheel Alignment

NOTE: All specifications are given for a vehicle at curb load.

CAMBER:
Nominal -0.46°
Minimum +0.79°
Maximum -1.71°
Difference/Split (Left Minus Right)
Nominal +0.00°
Minimum -0.70°
Maximum +0.70°

CASTER:
Nominal +2.30°
Minimum +1.30°
Maximum +3.30°
Difference/Split (Left Minus Right)
Nominal +0.00°
Minimum -0.85°
Maximum +0.85°

TOTAL TOE [a]
Degree:
Nominal +0.00°
Minimum -0.17°
Maximum +0.17°

mm/inch:
Nominal +0.0 mm (+0.000 inch)
Minimum +1.5 mm (+0.059 inch)
Maximum -3.5 mm (-0.138 inch)

CLEAR VISION [b]:
Nominal -0.6°
Minimum -3.6°
Maximum +2.4°

TURNING ANGLE [c]
At Left And Right Wheel 18.25°

[a] Positive value is toe-in, negative value is toe-out.
[b] Position of steering wheel spoke to horizontal. Negative value specification is counterclockwise.
[c] Turning angle at outside wheel with inside wheel turned 20°.