Without Traction Control

ADJUSTMENT PROCEDURE
1. Remove bolt and nuts retaining engine intake air resonator to throttle body. Raise engine intake air resonator and place to the side.
2. Remove accelerator cable clip at accelerator cable bracket.
3. Fully depress and hold accelerator pedal with prop tool.
4. Pull on accelerator cable outer housing at accelerator cable bracket to obtain Wide Open Throttle (WOT) at throttle body. Observe position of throttle body air valve. Install accelerator cable clip.
5. Remove accelerator pedal prop tool.
6. Observe position of throttle body air valve. Air valve should be closed and accelerator cable should deflect 1-3 mm (0.04-0.12 inch) midway between accelerator cable bracket and throttle body lever.